< Previous | Contents | Next >
The Stereo Fixer Fairlight FX
— Format: The input processing mode you want to use to fix the stereo output.
— Stereo: (Default) No format conversion is performed.
— Reverse Stereo: Swaps the Left and Right side.
— Mono: The output from the plugin is a mono mix of the two inputs.
— Left Only: The left input is sent to both left and right outputs.
— Right Only: The right input is sent to both left and right outputs.
— M/S: The left output is the left (Mid) input minus the right input (Side). The right output is the left (Mid) input plus right input (Side).
TIP: For a comprehensive M/S decoder solution, simply chain two Stereo Fixer plugins together. Use the first unit to control the Side signal level, thus controlling the width of the second unit (set to M/S).
TIP: For a comprehensive M/S decoder solution, simply chain two Stereo Fixer plugins together. Use the first unit to control the Side signal level, thus controlling the width of the second unit (set to M/S).
TIP: For a comprehensive M/S decoder solution, simply chain two Stereo Fixer plugins together. Use the first unit to control the Side signal level, thus controlling the width of the second unit (set to M/S).
— Left/Right Gain: Lets you apply independent gain on the left or right outputs. This gain is applied after (post) the input processing mode.
Stereo Width
An enhancement plugin that increases or reduces the spread of a stereo signal in order to widen or reduce the separation between channels. If this plugin is added to a Mono channel, it will be disabled, as there is no stereo width to either distribute or control.
A graph shows the currently selected width of stereo distribution as a purple arc, while inside of that graph a stereo meter shows the Left and Right distribution of the audio signal. Two audio meters measure levels, an Input meter to the left, and an Output meter to the right.
