< Previous | Contents | Next >
The symbol on the product indicates that this equipment must not be disposed of with other waste materials. In order to dispose of your waste equipment, it must be handed over to a designated collection point for recycling. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this product in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at personal expense.
Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired operation.
Davinci Resolve Advanced Panel Davinci Resolve Mini Panel Davinci Resolve Micro Panel
Davinci Resolve Studio USB Keylock DaVinci Resolve Editor Keyboard DaVinci Resolve Speed Editor
KCC-REM-BMD-DaVinciResolve MSIP-REM-BMD-201708001 MSIP-REM-BMD-201703002 MSIP-REM-BMD-201705001
R-R-BMD-201907001
R-R-BMD-20200211001
Fairlight Desktop Audio Editor Fairlight Console Audio Editor Fairlight Console LCD Monitor Fairlight Console Channel Fader Fairlight Console Channel Control Fairlight PCIe Audio Accelerator Fairlight Audio Interface
Fairlight PCIe Audio MADI Upgrade Fairlight Desktop Console
Fairlight HDMI Monitor Interface
R-R-BMD-2020103002 R-R-BMD-2020103002 R-R-BMD-2020103003 R-R-BMD-2020103004 R-R-BMD-2020103005 R-R-BMD-2020103006 R-R-BMD-2020103007 R-R-BMD-2020103008 R-R-BMD-20200728001 R-R-BMD-20200729001
This device complies with Canadian standards for Class A digital apparatus.
Any modifications or use of this product outside its intended use could void compliance to these standards. Connection to HDMI interfaces must be made with high quality shielded HDMI cables.
This equipment has been tested for compliance with the intended use in a commercial environment. If the equipment is used in a domestic environment, it may cause radio interference.
The DaVinci Resolve Speed Editor is a Bluetooth wireless technology enabled product. Contains transmitter module FCC ID: QOQBGM113
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Contains transmitter module IC: 5123A-BGM113
This device complies with Industry Canada’s license-exempt RSS standards and exception from routine SAR evaluation limits given in RSS-102 Issue 5.
Certified for Japan, certificate number: 209-J00204. This equipment contains specified radio equipment that has been certified to the technical regulation conformity certification under the radio law.
This module has certification in South Korea, KC certification number: MSIP-CRM-BGT-BGM113
to a approved low power radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease
operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Management Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.
Davinci Resolve Speed Editort is class A digital device. Operation of this product in a residential area, it may cause radio frequency disturbance, in this case the user will be required to take appropriate measures.
NCC ID number: CCAO21LP1880T3
Pending Certification for South Africa by ICASA, approval number TA-2021/1350
Cerified for Mexico (NOM), for Bluetooth module manufactured by Silicon Labs, model number BGM113A Includes transmitter module certified in Mexico IFT: RCBSIBG20-2560
Hereby, Blackmagic Design declares that the product (DaVinci Resolve Speed Editor) is using wideband transmission systems in 2.4 GHz ISM band is in compliance with directive 2014/53/EU.
The full text of the EU declaration of conformity is available from compliance@blackmagicdesign.com